无锡鼎隆矿业有限公司
WUXI DING LONG MINERALS CO.,LTD

  • 中文
  • Deutsch
  • ENGISH
  • About Us
  • Garnet Product
    • Overview
    • Waterjet Cutting Abrasive
    • Blasting Abrasive
    • Water Filtration Media
    • Precision Powders
    • Other Applications
  • Abrasive Meterial
    • Garnet Abrasive
    • Stainless Steel Cut Wire
    • Steel Grit & Steel Shot
    • Fused Alumina
    • Glass Reads
    • Cerablast
  • Other products
    • Ceramic proppants
    • Ceramic Foundry Sand
    • Anthracite Filter
    • Mica Powder
    • Barite/Barytes
    • Calcined Bauxite
  • Contact Us
Ceramic proppants
Ceramic Foundry Sand
Anthracite Filter
Mica Powader
Barite/Barytes
Calcined Bauxite

SCAN QR CODE

Ding Long Minerals products a full range of grades of anthracite filter media. These are produced from the anthracite mined in China, and are sold throughout the world.

Anthracite Filter is often used to produce a multi-media filter.This has several advantages over a single media filter.

* Increased filtration rates

* Longer filter run times

* Reduced backwash water consumption The bed of anthracite placed on top of the sand layer provides the filter with.

* Larger grain particles on the surface of the filter which delays the pressure drop across the filter.

* A larger reservoir in which the floc may be held before backwashing.

* A prefilter for sand filter below.

 

The grade of anthracite filter media is chosen so that it has a similar backwash expansion as the sand below it. This is important to prevent losses of anthracite during backwashing.

Technical Data Sheet

 
Physical Density
Specific Gravity
1.4~1.6 g/cm3
Bulk Density
750 – 780 g/m3
Hardness (Mohs)
3 ~ 4
Hardgrove
44 – 50
Density Above 1.8g/cm3
8% max
Porosity
50% min
Mud Content
4% max
Attrition Losses (100 hours backwash)
<0.4%
Solubility (24 hours 10% HCI)
<3.5%
According to the standard "CJ 24.2-88" of Ministry of Construction R.R. of China

 

Chemical Composition
Carbon
85%
Bash
4 – 8%
Volatile
5.0 – 7.0%
sdf

 

Standard Size
0.6 – 1.2 mm
0.66 mm
0.8 – 1.6 mm
0.88 mm
1.2 – 2.5 mm
1.31 mm
1.4 – 2.5 mm
1.52 mm
1.4 – 2.8 mm
2.5 – 5.0 mm
1.55 mm
5.0 – 10.0 mm
Within size range
10.0 – 20.0 mm
-----------
Unigormity Coefficient
≤1.6

 

 

Tel: +86-510-82755455 / 82755457 Fax: +86-510-82762125      Copyright©2009 Wuxi Ding Long Minerals Co.,Ltd.  ICP:08010489

About us | Site Map | Contact Us    BY DESIGN:PANASIA 版权所有:无锡鼎隆矿业有限公司 苏ICP备08010489号